How to apply your sticker?

Preparation

1. Ensure the area is clean, dry and free from dirt by wiping with a slightly damp cloth and then let the area dry for at least a few hours before you begin applying the decals.

Freshly painted walls must be left for at least 2 weeks before application; if your wall sticker is to be fitted on a wall where the other side of the wall is external you must wait 4-5 weeks before application.

2. If you have multiple stickers on one sheet you may wish to separate them to make the task more manageable.

3. Roll the sticker(s) out on a flat surface. Make sure the sticker is flat on the surface using the palm of your hand to ensure there are no creases or bubbles visible.

Important Notes:

Taking your time when applying the stickers will achieve the best results. Make sure everything is in position before removing the backing layer as the adhesive layer below is very sticky.

                                                          

                                                          The component of the sticker  

                                                           A. Application layer
                                                           B. Backing Layer
                                                           C. Vinyl wall sticker 

                                                                  The Steps 

1. Lay the sticker out on the surface, with the transparent application layer facing you. Tape all four corners of the sticker to the wall with your masking Tape.

2. Apply a strip of tape across the wall sticker to create an anchor point (Horizontally or vertically depending on shape of the sticker).

3. Once the sticker is anchored, remove the tape from the two top corners.

4. Begin to carefully peel the application layer from the backing layer, ensuring the sticker is stuck to the application layer. Keep peeling until you reach the anchor point.

5. Cut the backing layer as close to the central divide as possible.

6. Use your credit card or squeegee to stick the sticker (and application layer) to the surface, being careful to remove all bubbles. Start from the middle and work outwards, moving up slightly as you go along.

7. Wait a few minutes for the adhesive to attach the sticker to the wall then remove the anchor tape and repeat steps 6-8 on the opposite side.

8. Wait 10 minutes then peel back the clear paper ensuring Vinyl sticker is fully adhered to your surface. (Peel back slowly to ensure wall paint doesn’t come off with the clear paper)